Our Solutions
EV CHARGER – 2.2KW
The EV Charger – 2.2KW is a compact, energy-efficient, and reliable charging solution designed for electric cars, two-wheelers, e-bikes, and small EVs. With intelligent power management, universal compatibility, and multiple safety features, this charger ensures safe and efficient charging at home, in workplaces, or public parking spaces.
Key Features:
- 2.2KW Charging Power – Optimized for electric scooters, bikes, and small EVs.
- Universal Compatibility – Supports Type 1 (J1772) & Type 2 (IEC 62196) connectors.
- Smart Charging Technology – Dynamic power regulation for efficient charging.
- Built-In Safety Protections – Overvoltage, overcurrent, short circuit, and temperature protection.
- Compact & Lightweight Design – Easy installation and portability for home or travel use.
- Weatherproof & Durable – IP55-rated for indoor and outdoor charging.
Electrical Characteristics
| SPECIFICATIONS | VALUE |
|---|---|
| Max. Output Power | 2200W |
| Rated Power | 2200W |
| Nominal Input Voltage Range | 230VAC |
| Operating Range | 120V-280VAC |
| Input Current To The Charger | <18A |
| Input Frequency | 45 - 65Hz |
| Output Voltage Range | 35 - 60VDC |
| Rated Output DC Current | 35A |
| Max Output Current (33-60V I/P, Continuous) | 4A ~ 35A |
| Minimum Current Output | 4A @ Pre charge |
| Nominal Default Voltage | 60VDC |
| Voltage Tolerance | ±0.1VDC |
| Current Tolerance | ±0.5A |
| Efficiency @ >30% load | >=94% |
| iTHD | <5% |
| Power Factor | >=0.9 |
| No Load / Standby Power Consumption | <1.5W |
| Ramp Up/Down Time for 1V change | <100ms |
| Cold Start Time | <3s |
Safety
| PROTECTION | |
|---|---|
| Under Voltage & Overvoltage Without Jitter | Over Current & Short Circuit Protection |
| Surge Protection Type 3 Inbuilt TVS 6kV B72220S0301K101 | O/P Reverse Polarity Protection |
| O/P Overvoltage Protection: Cut off after 59 ± 1 V | Automatically Shut Down After Full Charge |
| Charger Thermal Shutdown: Calibrate based on Housing | Residual Current Protection through RCD: Optional in Adaptor Mounting |
| GALVANIC ISOLATION | ||
|---|---|---|
| INPUT-OUTPUT 2500 VAC, 50 Hz, 1 min, <10 mA | INPUT – Heatsink 1500 VAC, 50 Hz, 1 min, <10 mA | OUTPUT – Heatsink 500 VDC, 50 M ohm (min) |
Communication Features
| Communication Interface | CAN2.0B 500Kbps / Isolated CAN UART | Automatic Shutdown | Yes |
| Standby Power Of | Yes |
Display
| LED’s | Status Indications - Battery Status - Error and Fault Indication - SOC Indication in terms of % - 25%,50%,75% & 100% | REMARK |
| Can be customized as per the customer spec |
| Faults and Alerts | Alarms over CAN Bus. LED Indications Warning and Fault Handling Logic Can Be Implemented | REMARK |
| Can be customized as per the customer spec |
Test Procedure
| PROCEDURE | REMARKS |
|---|---|
| LPS | Tested |
| Power Factor Of PFC at Universal Operating Range | 120-280 |
| Constant Voltage Minimum And Maximum Range | 35-60 |
| Constant Current Minimum And Maximum Range | 4 to 35 |
| Soft Start Time | 1 Sec |
| Current and Voltage Protection | Tested |
| CAN Communication | Tested |
| Overall Efficiency | 95% |
Why Choose Us
- Ideal for e-bikes, e-scooters, and light-duty EVs.
- Low power consumption while maximizing charging efficiency.
- User-friendly operation with hassle-free installation.
- Meets global safety standards for worry-free operation.
Reach Out – We’re Here to Help
Get in Touch with Us for Any Inquiries, Orders, or Support Needs
We’re here to help with all your electronic component needs. Whether you have questions about product availability, pricing, bulk orders, or custom sourcing, our expert team is ready to assist you.